Offer to repeat led snowflake assembled on a microcontroller and performs with 12 effects. 64 red LEDs located on the Board in the form of webs and are collected in a matrix. Buttons to select effect in either direction and variable speed. Moreover, if simultaneously press button, to adjust speed, it will begin to change automatically, from larger to smaller and Vice versa. And if you simultaneously press the buttons change the effect, they will begin to change in a circle. This will occur as long as any button is pressed, and everything will remain in the same mode as when it was caused by depression.
When using a TINY2313, you can do without quartz, setting the fuses for internal oscillator.
Effects built into the program, you can modify at your discretion. Description deliberately cut, all clear
and so from photos and videos. As the saying goes, better to see once.
